Lower heating and cooling costs
Insulating the cavity reduces heat transfer through walls, so your heater and cooler do not have to work as hard to maintain a comfortable temperature.
Somerton
Cavity wall insulation for brick veneer and double brick homes in Somerton. We assess suitability, install through small holes and patch them afterwards to stop draughts and cut heating costs.
Share your details and Expert Insulation Melbourne will contact you about Cavity Wall Insulation in Somerton.
Cavity wall insulation fills the gap between the inner and outer leaf of brick veneer or double brick walls with insulating material. In Somerton, this is done by drilling small access holes in the mortar, injecting the insulation and then patching the holes to match the existing brickwork. It is a clean method that does not require removing internal linings or external cladding.
Somerton’s brick veneer homes often have uninsulated wall cavities that let cold air in during winter and allow heat to escape. Filling these cavities improves thermal resistance and reduces draughts without altering the home’s exterior appearance.
Insulating the cavity reduces heat transfer through walls, so your heater and cooler do not have to work as hard to maintain a comfortable temperature.
Sealing the cavity stops cold air entering through gaps in the brickwork, making rooms feel warmer in winter and cooler in summer.
The work is done from the outside, so there is no need to remove plaster, cornices or architraves inside your home.
Once the access holes are patched and colour-matched, the brickwork looks the same as before the installation.
Brick veneer walls without insulation can feel cold to touch in winter. Cavity insulation raises the surface temperature of internal walls.
Most brick veneer and some double brick homes built from the 1960s onwards have a cavity that can be insulated, provided there are no moisture issues.
We follow a careful process to ensure the insulation is installed correctly and the brickwork is left looking as good as new.
We check the wall type, cavity width and moisture levels. If the cavity is wet or the wall is not suitable, we will not proceed. If old insulation is present and may contain asbestos, work stops until a qualified asbestos assessor inspects it.
Small holes are drilled in the mortar joints at regular intervals around the home. These are positioned to allow full coverage of the cavity.
Insulation material is blown into the cavity under controlled pressure to fill it evenly without compressing or leaving gaps. We use materials designed for cavity applications.
The access holes are filled with matching mortar and colour-matched to the existing brickwork so they are barely visible once dry.
Somerton has many brick veneer homes built in the 1970s to 1990s that were not originally insulated. These homes often suffer from cold internal walls in winter and heat gain in summer because the cavity between the brick leaves is empty. Cavity wall insulation is a practical upgrade that improves thermal performance without changing the look of the house. Nearby suburbs like Craigieburn and Roxburgh Park have similar housing stock that also benefits from this service.
Reduce heat loss and draughts in your Somerton brick veneer home with cavity wall insulation installed from the outside.
Homeowners in Somerton often ask how cavity wall insulation works, whether their home is suitable and what to expect during installation.
Cavity wall insulation in Somerton is a cost-effective way to improve the thermal performance of brick veneer and double brick homes. The process involves injecting insulating material into the gap between the inner and outer brick leaves through small holes drilled in the mortar. Once filled, the cavity resists heat flow, reducing winter heat loss and summer heat gain through the walls. This is particularly valuable in Somerton, where cold winters and hot summers place high demands on heating and cooling systems.
Not all homes are suitable for cavity wall insulation. We first assess the wall construction, cavity width and moisture levels. Brick veneer homes built from the 1960s onwards typically have a cavity, but older double brick homes may not. If moisture is present in the cavity, insulation can trap it and cause damp issues inside the home, so we only proceed when conditions are dry. If existing material in the cavity might contain asbestos, work stops until a qualified asbestos assessor inspects it.
The installation is quick and causes minimal disruption. Most Somerton homes take one day to complete, with the team working from the exterior. After drilling the access holes, we inject the insulation evenly throughout the cavity and then patch the holes to match the brickwork. The result is a warmer home in winter, cooler in summer and lower energy bills without any visible changes to your property.
If your Somerton home has brick veneer or double brick walls, cavity insulation can cut heat loss and draughts. Call us to check suitability and arrange an installation.